Fujitsu Futro S920
Measured idle power
~7.8 W idle
Wall meter
Source: Thin Clients as Home Servers: Dell Wyse 5060 and Fujitsu Futro S920 — weisser-zwerg.dev · dated 2022-10-15
ECC memory support
No cited source — left blank rather than guessed.
NIC chipset
NIC silicon not independently confirmed — verify with lspci -nn.
RAM ceiling
8 GB DDR3 (upgraded from 4 GB by reviewer)
Source: Thin Clients as Home Servers: Dell Wyse 5060 and Fujitsu Futro S920 — weisser-zwerg.dev · dated 2022-10-15
IOMMU / GPU passthrough
No community passthrough report sourced yet for this model.
Where to buy
Deterministic search links for “Fujitsu Futro S920” — not specific listings, and not paid placements. Prices, stock and the exact SKU/revision vary; confirm the unit you receive against the cited specs above.
Frequently asked questions
What is the Fujitsu Futro S920's idle power consumption?
Fujitsu Futro S920 (AMD GX-222GC (G-Series)) idles at ~7.8 W idle. Method: Wall meter. This is a wall-measured figure — verified 2026-06-02.
Does the Fujitsu Futro S920 support ECC memory?
Not confirmed — no cited source for ECC on the Fujitsu Futro S920, so we leave it blank rather than guess.
Is the Fujitsu Futro S920 good for Proxmox / a homelab?
A cheap used AMD GX dual-core thin client idling ~7.8 W; fine for a light Proxmox/Docker node but limited by 8 GB RAM and an aging 2-core SoC. RAM ceiling: 8 GB DDR3 (upgraded from 4 GB by reviewer). NIC: not stated.
Sources
Thin Clients as Home Servers: Dell Wyse 5060 and Fujitsu Futro S920 — weisser-zwerg.dev · dated 2022-10-15
https://weisser-zwerg.dev/posts/dell-wyse-fujitsu-futro/
Cited public information, not purchasing advice. Onboard NIC silicon and BIOS can differ between production batches of the same model name — confirm the revision you receive (
lspci -nn) before relying on a NIC or passthrough claim. Idle draw depends on OS, mains voltage (120 V vs 240 V) and power tuning (powertop).